'Tis the season where you'll receive dozens of holiday cards and struggle to not let them pile up on the counter. A DIY card holder is an easy and festive way to show off your beautiful cards without letting them get lost among your other decor.
What you'll need:
24" x 36" cork board
Patterned metal radiator cover (sold near the sheet metal at a home improvement store)
White spray paint suitable for metal
Gray acrylic paint
White all-purpose glue
X-acto knife or box cutter
32"-36" metal ruler
Measure in from the bottom of the corkboard longways and make a mark 8" away from the edge. Make several marks along the width of the board at 8" because we'll be connecting them to make a straight line later on. This will form the bottom of the card holder.
Lay the measuring tape across the top of the corkboard and make a mark halfway through at 12." This will be the point of the triangle we're creating.
With a ruler, connect the marks you made in step 1 and cut a straight line across with your box cutter or X-acto knife. A couple medium-to-shallow cuts is more effective (and safer) for me than to do one deep cut all the way through the board.
Connect the point at the top with the edge of the line at the bottom of corkboard using the ruler. Cut through and repeat on the other side of the triangle. Flip the board over to make sure your cuts went all the way through.
Gently pop triangle out of the main corkboard.
Paint the cork side of the triangle piece gray and let dry.
Lay radiator cover face down (the pattern on the front will be slightly raised) and lay triangle corkboard piece face down on top of it. Use pieces of masking tape to mark the edge of the triangle on the radiator cover.
Set aside corkboard piece and cut a triangle out of the metal using metal cutters and the masking tape as a guide.
Apply glue along the bottom and sides on the backside of the radiator cover. I applied just a light amount in the center. Align metal with corkboard triangle piece and press, weighing down with something heavy like books, weights, etc. Let dry overnight.
To display, prop the card holder against a wall or use the mounting hardware that came with the corkboard. Hang cards onto the board with pushpins or patterned washi tape.
Jenn Kirk is the blogger behind Ambrosia Creative where she shares crafts, children's projects and tidbits about her family. Follow her on Pinterest, Twitter, and Instagram.