resetting fertility monitor?

iVillage Member
Registered: 04-08-2003
resetting fertility monitor?
4
Tue, 07-15-2003 - 11:37pm
Hi! I have just a quick question. Is it possible to reset the Clear Plan East fertility monitor? I recieved one from a friend of mine that she only used a few times. I called the 1 800 number and they said no because you shouldn't use another persons. I guess that's their way of getting every one to buy a new monitor. If any one knows of a way to do this, please let me know. Thanks in advance!

Charmaine

Avatar for debra_lea
iVillage Member
Registered: 04-28-2003
Wed, 07-16-2003 - 1:11am
Hi! I actually copied this from another site's message board. But, I used this technique with my ebay purchased monitor and it seemed to work just fine. Debra

1. With the monitor off, place a clean unused test stick with the cap on in the

monitor.

2. Make sure it snaps in. Turn the monitor on.

3. Press and hold the "m" button.

4. It will show you the "remove the test stick" sign.

5. Keep pressing the "m" button and in about 20 seconds, you will see a

screen full of symbols. The screen will look as if it is going crazy and will be full

of pics.

6. Remove the test stick and then release your finger from the "m" button. All

of the memory should be wiped out.

iVillage Member
Registered: 04-08-2003
Wed, 07-16-2003 - 9:56am
Thanks so much! I will try that!

Charmaine
iVillage Member
Registered: 04-08-2003
Wed, 07-16-2003 - 5:52pm
I tried it and it didn't seem to work. My screen didn't go crazy- nothing happened at all. :(

Charmaine

Avatar for debra_lea
iVillage Member
Registered: 04-28-2003
Wed, 07-16-2003 - 7:15pm
Hmmmm. It didn't really "go crazy for me", it just blinked once a lot of different symbols. I had to hold it down for a good 15-20 seconds though. You might just want to try it again. I'm not sure if its a big deal if you just go ahead and use it otherwise. It might just take a cycle or two to get use to your body.

Debra