? on Clear Blue Easy HPT
Find a Conversation
? on Clear Blue Easy HPT
| Wed, 09-17-2003 - 1:23pm |
I used a CBE test today and could hardly read the result!!! I know it was a BFN but I could hardly see it. Could the test be wrong??? I had brown CM last night and a little today (AF due today) but no AF and no BFP. I think it is just that the test was screwed up or something. There was the control line but hardly no test line. Any input???
Jess c#8 cd29

There should be a control line every time you test. If there is no control line, then the test was defective or you didn't get enough urine on the test (or maybe too much). So be sure to follow the instructions carefully. Also if you saw ANY test line at all, that is a positive and you are probably pregnant. (as long as it showed during the test time usually 3-10 minutes).
I hope that this turns into a BFP for you!
VIcki
I also had 'issues' with the Clear Blue Easy Earliest tests. The line(s) were always there but they were usually spotty or faint...even the control lines. I used both Clear Blue and FRE. The day I got a faint + with FRE I also got a faint + with Clear Blue, but it seemed much less reliable. Even as I got further along the results on the Clear Blue tests sucked...in my opinion!!!! Maybe I just suck at POAS...LOL!!! But I was obviously able to do it with other brands, so I'm blaming Clear Blue :)
Hope this helps!
Lori & Lil One
EDD 4/16/04
Good luck to all!!!
Jess
Lori
Monique (35) ttc#2 c1 cd11 (after m/c 8/03)
DH (36)
DS 9/30/00
~i~ 8/13/03
http://circles2.fertilityfriend.com/home/4007