Want more iVillage? Sign up for our
Newsletters
Lung Function Tests
About this test
Lung function tests (also called pulmonary
function tests, or PFTs) check how well your lungs work. The tests determine
how much air your
lungs 
can hold, how quickly you can move air in and
out of your lungs, and how well your lungs put oxygen into and remove carbon
dioxide from your blood. The tests can diagnose lung diseases, measure the
severity of lung problems, and check to see how well treatment for a lung
disease is working.
Other tests—such as residual volume, gas diffusion tests, body plethysmography, inhalation challenge tests, and exercise stress tests—may also be done to determine lung function.
Spirometry is the first and most commonly done lung function test. It measures how much and how quickly you can move air out of your lungs. For this test, you breathe into a mouthpiece attached to a recording device (spirometer). The information collected by the spirometer may be printed out on a chart called a spirogram.
The more common lung function values measured with spirometry are:
- Forced vital capacity (FVC). This measures the amount of air you can exhale with force after you inhale as deeply as possible.
- Forced expiratory volume (FEV). This measures the amount of air you can exhale with force in one breath. The amount of air you exhale may be measured at 1 second (FEV1), 2 seconds (FEV2), or 3 seconds (FEV3). FEV1 divided by FVC can also be determined.
- Forced expiratory flow 25% to 75%. This measures the air flow halfway through an exhale.
- Peak expiratory flow (PEF). This measures how quickly you can exhale. It is usually measured at the same time as your forced vital capacity (FVC).
- Maximum voluntary ventilation (MVV). This measures the greatest amount of air you can breathe in and out during one minute.
- Slow vital capacity (SVC). This measures the amount of air you can slowly exhale after you inhale as deeply as possible.
- Total lung capacity (TLC). This measures the amount of air in your lungs after you inhale as deeply as possible.
- Functional residual capacity (FRC). This measures the amount of air in your lungs at the end of a normal exhaled breath.
- Residual volume (RV). This measures the amount of air in your lungs after you have exhaled completely. It can be done by breathing in helium or nitrogen gas and seeing how much is exhaled.
- Expiratory reserve volume (ERV). This measures the difference between the amount of air in your lungs after a normal exhale (FRC) and the amount after you exhale with force (RV).
Gas diffusion tests
Gas diffusion tests measure
the amount of
oxygen and other gases that cross the lungs' air sacs (alveoli ) per minute.
These tests evaluate how well gases are being absorbed into your blood from
your lungs. Gas diffusion tests include:
- Arterial blood gases, which determine the amount of oxygen and carbon dioxide in your bloodstream.
- Carbon monoxide diffusion capacity (also called DLCO), which measures how well your lungs transfer a small amount of carbon monoxide (CO) into the blood. Two different methods are used for this test. If the single-breath or breath-holding method is used, you will take a breath of air containing a very small amount of carbon monoxide from a container while measurements are taken. In the steady-state method, you will breathe air containing a very small amount of carbon monoxide from a container. The amount of carbon monoxide in the breath you exhale is then measured. Diffusing capacity provides an estimate of how well a gas is able to move from your lungs into your blood.
Body plethysmography
Body plethysmography may be used to measure:
- Total lung capacity (TLC), which is the total amount of air your lungs can hold. For this test, you sit inside a small airtight room called a plethysmograph booth and breathe through a mouthpiece while pressure and air flow measurements are collected.
- Residual volume (RV), which is the amount of air that remains in your lungs after you exhale as completely as possible. For this test, you sit inside the plethysmograph booth and breathe while the pressure of the booth is monitored. You may need to breathe through a mouthpiece while you are in the booth.
Inhalation challenge tests
Inhalation challenge tests are done to measure the response of your airways to substances that may be causing asthma or wheezing. These tests are also called provocation studies.
During inhalation testing, increasing amounts of a substance are inhaled through a nebulizer, a device that uses a face mask or mouthpiece to deliver the substance in a fine mist (aerosol). Sometimes, increasing amounts of methacholine or mannitol may be inhaled through the nebulizer. Spirometry readings are taken to evaluate lung function before, during, and after inhaling the substance.
In rare cases, a bronchospasm can occur with inhalation challenge testing. You will be closely monitored during and after the test.
Exercise stress tests
Exercise stress tests evaluate the effect of exercise on lung function tests. Spirometry readings are done after exercise and then again at rest.
Multiple-breath washout test
The multiple-breath washout test is done to check lung function in people with cystic fibrosis. For this test, you breathe air that contains a tracer gas through a tube. Then you breathe regular air while the amount of tracer gas you exhale is monitored. Test results are reported as a lung clearance index (LCI). A high LCI value means that the lungs are not working well.
Lung function results are measured directly in some tests and are calculated in others. No single test can determine all of the lung function values, so more than one type of test may be done. Some of the tests may be repeated after you inhale medicine that enlarges your airways (bronchodilator).
| By: | Healthwise Staff | Last Revised: April 28, 2011 |
| Medical Review: | E. Gregory Thompson, MD - Internal Medicine Mark A. Rasmus, MD - Pulmonology, Critical Care Medicine, Sleep Medicine | |
© 1995-2011 Healthwise, Incorporated. Healthwise, Healthwise for every health decision, and the Healthwise logo are trademarks of Healthwise, Incorporated. This information does not replace the advice of a doctor. Healthwise, Incorporated disclaims any warranty or liability for your use of this information. Your use of this information means that you agree to the Terms of Use. How this information was developed to help you make better health decisions.
Welcome to Care Circle, an exclusive tool to help you take care of yourself and your loved ones. Here's how it works:
- Create profiles for yourself and your loved ones.
- Select the topics and conditions that interest each of you.
- Get customized news updates, original content, tools, and expert advice for each Care Circle member delivered directly to your personalized homepage.
The information you input is strictly private; you choose who has access to your Care Circle.
How do I add myself or someone else to my care circle?
Click on "Add someone." Fill out the short profile. Choose an avatar. Select the topics and conditions that interest this person from the pulldown menu. You can select as many as you want, but you must choose at least one. Click on "Add Someone" again. You should start getting updates immediately.
How do I save content to my Care Circle?
Click on "Manage My Care Circle." Select the tab of the person for whom you're saving content. Put your cursor over the piece of content that you want to save; a disk icon will appear in the righthand corner. Click on the disk and the piece of content will be moved to a save folder.
How do I add additional topics and conditions for someone in my Care Circle?
Click on "Manage My Care Circle." Select the tab for the person whose preferences you'd like to update. Under "Add More to Follow," select additional topics and conditions.
How do I delete topics and conditions for someone in my Care Circle?
Click on "Manage My Care Circle." Select the tab for the person whose preferences you'd like to update. Under "Follows," scroll over the topic or condition you want to delete. An "X" should appear on the righthand side. Click on the "X" and the topic or condition will be deleted from the list.
To manage your Care Circle, Please
Sign In.
